AIDEEPEN Red Board With Remote Control Solar Integrated Street Light Controller Driver Board 3.2V 3.7V For Home Fan Control Board

Product Features:
Compatible with 3.2V lithium iron phosphate battery and 3.7V lithium battery.
It can be used for solar integrated street light modification or maintenance.
Microwave sensing full brightness 10 seconds to turn slightly bright.
Multi-mode low light long light, can be timed.
Easy to use, suitable for all kinds of DIY operations.
Product parameters:
Application LED voltage: 2.8V-3.3V.
Power: <10W (60W on the market) Maximum input of solar panels: 5V-6V/<20W Induction method: light control induction + radar body sensing Sensing range: 5-10 meters Induction time: high brightness about 10 seconds + low brightness long bright. Module size: 65mm*20mm Remote control size: 104mm*37.5mm Instructions for use: Please connect the battery first. Then connect the LED light. Finally, connect the solar panels. This control board does not have overcharge and overdischarge protection. Please install a protective board on the battery to prevent overcharge and overdischarge; This control board does not have overcharge and overdischarge protection. The battery needs to come with a protection board, compatible with 3.2V lithium iron phosphate battery and 3.7V lithium battery, which can be used for solar integrated street lamp modification or maintenance. Microwave sensing full brightness 10 seconds to turn slightly bright. The remote control equipped with this product does not have a battery inside. You need to buy your own No. 7 battery to use. Testing considerations: 1. When testing the sensing mode, there can be no moving objects, including hand and foot movement, within 12 meters of the surrounding area, otherwise it will be detected 2. When multiple sensing modules are together, mutual interference will occur, resulting in insensitive induction, or false triggering will occur 3. The surface of the patch parts is the emitting surface, and the stickers and glue cannot be glued here, otherwise the sensing distance will be shortened 4. THE DISTANCE BETWEEN THE FRONT AND BACK SIDES OF THE SENSOR IS NOT LESS THAN 2CM FROM THE METAL 5. The surface of the patch parts cannot be covered by metal, otherwise the detection signal cannot be transmitted and the sensing distance will be shortened 6. The induction signal can penetrate glass, plastic walls, etc. Product List: 1X module 1X remote control (batteries not included)